Difference between revisions of "3M Fastbond Contact Adhesive 30NF"
| Line 26: | Line 26: | ||
==Working Properties== | ==Working Properties== | ||
| − | Shelf life of 6 months once opened; 15 month for unopened container. | + | Shelf life of 6 months once opened; 15 month for unopened container. Store at room temperature (do not refrigerate) |
Apply to both surfaces as evenly as possible (roll or spray on, 2 coats), let it dry, then place 2 surfaces in contact with each other. Apply consistent even pressure for best adhesion. Consistency of product formula (has not changed since released by 3M) and thin application layer are both positive reasons to select this product over similar products from other brands. | Apply to both surfaces as evenly as possible (roll or spray on, 2 coats), let it dry, then place 2 surfaces in contact with each other. Apply consistent even pressure for best adhesion. Consistency of product formula (has not changed since released by 3M) and thin application layer are both positive reasons to select this product over similar products from other brands. | ||
Revision as of 13:36, 25 October 2020
Description
[3M] A low-odor, water-based contact adhesive composed Fastbond 30NF designed to have high strength and bond most foamed plastics, laminates, wood, and canvas to themselves and to each other.
Synonyms and Related Terms
Green glue
Applications
Exhibit: case construction; typically used on surfaces of casework and other exhibit structures; use this product to adhere high pressure laminate material/ barrier material (e.g. Formica) to the surface of structural and surface material. Can be used to “seal” the MDF.
Can be used to adhere materials together, including PVC Sheet, Metal Sheet, Foam Sheeting, and all natural products.
Personal Risks
Apply in a well ventilated area, respirator may be required. Gloves and eye protection should be worn.
3M Safety Data Sheet: [1]
Collection Risks
From wiki: 1996 GCI Permanent, 2019 MMA Temporary.
Environmental Risks
Listed as Eco-friendly and a Green Guard product from 3M
Physical and Chemical Properties
- Water-based liquid with pH=10-11
- Boiling point = >64 C
- Density = 1.1
- Solids Content = 42.7-57%
- Dry time = 30 minutes (depends on temperature and humidity)
- Bonding is immediate on contact. No adjustment is possible
Working Properties
Shelf life of 6 months once opened; 15 month for unopened container. Store at room temperature (do not refrigerate)
Apply to both surfaces as evenly as possible (roll or spray on, 2 coats), let it dry, then place 2 surfaces in contact with each other. Apply consistent even pressure for best adhesion. Consistency of product formula (has not changed since released by 3M) and thin application layer are both positive reasons to select this product over similar products from other brands.
Works well on foams, PVC sheeting, wood and other natural products, as well as some metal sheeting.
Clean up while wet with mild soap and water. Once dry, the product can only be removed using acetate or similar chemical compound
Forms and Sizes
Purchase through 3M product distributors in quarts, half gallons, gallons and five gallon containers
Resources and Citations
- 3M Fastbond Contact Adhesive Technical Data