Polyurethane

L'Enquêteur
MFA# 1989.818

Description

A family of polymers made by a condensation reaction of an organic isocyanate with a compound containing a hydroxyl group, such as glycol. Polymers of this type (ester type) were first made in 1937 by Otto Bayer at I.G.Farben. During W.W.II, Germany made brush bristles and filtration fabrics from Perlon U, an early polyurethane. In the 1950s another type of polyurethane using an ether starting compound (ether type) was used to produce elastomeric polyurethane fiber called spandex or elastane. Spandex has elastic characteristics similar to Natural rubber. Since the 1980s, water-blown flexible polyurethane foams were made for seals and gaskets In the 90s, do to the elimination of halogen blowing agents, polyurethane foaming techniques were expanded to insulation materials, cushions and packaging. As solvent based liquids and solids, polyurethanes are used as sealants, adhesives, films, shopping carts, and automobile bumpers. Polyurethanes can be rigid or soft, thermosetting or Thermoplastic. Additionally, they react with isocyanates to produce a foamed resin. Polyurethane resins are also used as coatings where they provide excellent hardness, Gloss, and resistance to Weathering, Abrasion, acids, and alkalis.

Table of Polyurethane variations and their Characteristics

Types	Properties	Forms	Characteristics	Uses
Polyether urethane	thermoset	flexible open cells	lightweight, resistant to water, allows vapor penetration, larger bubbles, less expensive	speaker foam, aquarium filters, patio cushions, foam padding, mattresses, flotation devices
Polyester urethane	thermoset	flexible open cells	lightweight, resistant to solvents, allows vapor penetration, smaller bubbles	packing foam, insulation, soundproofing, shock absorption, pink anti-static foam, mops, sponges
Polyether urethane	thermoset	rigid closed cells	dense, resistant to water, less expensive	thermal and moisture insulation, vapor barriers, tool making, wood replacement
Polyester urethane	thermoset	rigid closed cells	dense, resistant to solvents	thermal and moisture insulation, vapor barriers, tool making, wood replacement
Polyether urethane	thermoplastic (TPU)	soft to rigid	textiles, upholstery, elastane
Polyester urethane	thermoplastic (TPU)	soft to rigid	skate wheels, safety helmets

Synonyms and Related Terms

PUR; PU: poliuretano (Esp.); polyuréthane (Fr.); poliuretano (It.); poliuretano (Port.); spandex; elastane

Examples: Perlon® U [Ger.]; Lycra® [DuPont];

Personal Risks

Urethane burns with a bright flame producing a sharp odor and toxic fumes.

Fischer Fixing Systems: [Safety Data Sheet] [[File:Polyurethane chair.jpg|thumb|Polyurethane chair
MFA# 1996.111]

FTIR

FTIR

Collection Risks

• Potential degradation products are hydrogen cyanide and ammonia.
• Polyether type urethanes are very susceptible to light degradation.
• Polyester type urethanes are very susceptible to degradation at high humidities.
• Polyurethane foams can yellow, become brittle and crumble.
• Chlorine bleach may cause degradation.

Hydrolysis of polyester urethane foams can lead to loss of the structural support given by this material. Oxidation of polyether urethane foams is the primary deterioration method. (Lattuati-Derieux, 2011)

Physical and Chemical Properties

Coatings are resistant to weathering, abrasion, acids and alkalis.

Attacked by aromatic solvents, chlorinated solvents, ozone, and nitrogen oxides.

Spot test for detection: dimethyl amino benzaldehyde in glacial acetic acid - positive reaction gives bright yellow color (Roff et al 1971)

Additional Information

Links to Oddy Test results posted on AIC Wiki Materials Database Pages for individual materials below

water-based Polyurethane tested in 2003

Comparisons

Properties of Synthetic Fibers

Physical Properties for Selected Thermoplastic Resins

General Characteristics of Polymers

Resources and Citations

• Lattuati-Derieux, A.; Thao-Heu, S.; Lavédrine, B. “Assessment of the degradation of polyurethane foams after artificial and natural ageing by using pyrolysis-gas chromatography/mass spectrometry and headspace-solid phase microextraction-gas chromatography/mass spectrometry” Journal of Chromatography A, 1218(28) 2011, 4498-4508. https://doi.org/10.1016/j.chroma.2011.05.013

• Contributions: Molly McGath and Thea van Oossten, AIC Plastics Panel, 2020.

• https://www.thefoamfactory.com/blog/index.php/ether-and-ester-based-polyurethane-foam-characteristics-differences-and-uses ) Accessed July 2020)

• W.J.Roff, J.R.Scott, J.Pacitti (compilers) Handbook of Common Polymers:Fibres, Gilms, Plastics and Rubber Cleveland: CRC Press, Butterworth & Co., 1971.
• C&E News Aug 2004 - first developed by Otto Bayer in 1937.

• Encyclopedia Britannica, http://www.britannica.com Comment: "Polyurethane." 18 Aug. 2004

• Marjorie Shelley, The Care and Handling of Art Objects, The Metropolitan Museum, New York, 1987

• Thomas C. Jester (ed.), Twentieth-Century Building Materials, McGraw-Hill Companies, Washington DC, 1995

• Michael McCann, Artist Beware, Watson-Guptill Publications, New York City, 1979

• Dictionary of Building Preservation, Ward Bucher, ed., John Wiley & Sons, Inc., New York City, 1996

• Sharon Blank, An introduction to plastics and rubbers in collections, Studies in Conservation, 35, 53-63, 1990

• M. Baker, E. McManus, 'History, Care and Handling of America's Spacesuits', JAIC, 31, 77-85, 1992

• Theodore J. Reinhart, 'Glossary of Terms', Engineered Plastics, ASM International, 1988

• Richard S. Lewis, Hawley's Condensed Chemical Dictionary, Van Nostrand Reinhold, New York, 10th ed., 1993

• The American Heritage Dictionary or Encarta, via Microsoft Bookshelf 98, Microsoft Corp., 1998

• Website address: www.me.umist.ac.uk.historyp/

• Art and Architecture Thesaurus Online, http://www.getty.edu/research/tools/vocabulary/aat/, J. Paul Getty Trust, Los Angeles, 2000