Difference between revisions of "Triacetate fiber"
m (Text replace - "\[http:\/\/cameo\.mfa\.org\/materials\/fullrecord\.asp\?name=([^\s]+)\s(.*)\]" to "$2") |
|||
| Line 12: | Line 12: | ||
[[[SliderGallery rightalign|Arnelfiberkj1.jpg~FTIR|TriacetateTestfabrics.jpg~FTIR|arnel500m.jpg~SEM]]] | [[[SliderGallery rightalign|Arnelfiberkj1.jpg~FTIR|TriacetateTestfabrics.jpg~FTIR|arnel500m.jpg~SEM]]] | ||
| − | == | + | == Physical and Chemical Properties == |
| − | Soluble in chloroform, methylene chloride, m-cresol, 90% phenol | + | *Soluble in chloroform, methylene chloride, m-cresol, 90% phenol |
| − | + | *Insoluble in acetone | |
| − | + | *Unaffected by dilute acids, alkalis and bleaches | |
| − | + | *Cross section is bulbous; fiber has longitudinal striations | |
| − | + | *Tenacity = 1.1-1.4 g/denier (dry); 0.7-0.8 g/denier (wet) | |
| − | + | *Elongation 25-35% (dry); 30-40% (wet) | |
| − | + | *Moisture regain = 2.5-3.5% | |
| − | + | *CAS# = 9012-09-3 | |
| − | + | *Melting Point = 300 | |
| − | + | *Density = 1.32 | |
| − | |||
| − | |||
| − | |||
== Hazards and Safety == | == Hazards and Safety == | ||
Revision as of 16:15, 30 May 2020
Description
A manufactured fiber produced from Cellulose triacetate. Cellulose triacetate was first developed by Schutzenberger in 1865. However, this early acetate was a tough hard Plastic that contained high amounts of acids and was only soluble in expensive chlorinated solvents. Thus, cellulose triacetate was not commercially viable until the mid-1950s when economical solvents became available. Triacetate is a durable fiber that is resistant to wrinkles, stains, chemicals, sunlight, insects, and moisture. It should not be dry-cleaned but is not degraded by normal laundering. It dries quickly in air or cool driers and maintains its shape without ironing. Triacetate is a crisp, firm fabric that is often used in taffetas and suitings. It is used in drip-dry clothing, tablecloths, skirts, and slacks. It is often used in wool blends to increase washability and crease retention. A surface saponification finishing process, called S-Finishing, is often applied to triacetate fabrics to minimize static.
See also Acetate fiber.
Synonyms and Related Terms
triacetate fibre; Arnel® [Celanese, America]; Tricel [British Celanese]; Trilan; primary acetate; JPS [Courtaulds]; Courpleta [Courtaulds];fibra de triacetato(Esp.)
Physical and Chemical Properties
- Soluble in chloroform, methylene chloride, m-cresol, 90% phenol
- Insoluble in acetone
- Unaffected by dilute acids, alkalis and bleaches
- Cross section is bulbous; fiber has longitudinal striations
- Tenacity = 1.1-1.4 g/denier (dry); 0.7-0.8 g/denier (wet)
- Elongation 25-35% (dry); 30-40% (wet)
- Moisture regain = 2.5-3.5%
- CAS# = 9012-09-3
- Melting Point = 300
- Density = 1.32
Hazards and Safety
Subject to static cling
Additional Information
° G.Cook, Handbook of Textile Fibres:II. Man-made Fibres, 5th edition, Merrow Publishing Co., Durham, England, 1984. p.99.
Comparisons
Properties of Synthetic Fibers
Sources Checked for Data in Record
- Hoechst Celanese Corporation, Dictionary of Fiber & Textile Technology (older version called Man-made Fiber and Textile Dictionary, 1965), Hoechst Celanese Corporation, Charlotte NC, 1990
- Rosalie Rosso King, Textile Identification, Conservation, and Preservation, Noyes Publications, Park Ridge, NJ, 1985
- Marjory L. Joseph, Introductory Textile Science, Holt, Rinehart and Winston, Fort Worth, TX, 1986
- Identification of Textile Materials, The Textile Institute, Manchester, England, 1985
- J.Gordon Cook, Handbook of Textile Fibres:II Man-made Fibres, Merrow Publishing Co. , Durham, England
- Wikipedia, the free encyclopedia, at http://www.wikipedia.com Comment: http://en.wikipedia.org/wiki/Triacetate (Accessed Nov. 9, 2005)
- Van Nostrand's Scientific Encyclopedia, Douglas M. Considine (ed.), Van Nostrand Reinhold, New York, 1976