Difference between revisions of "Tyvek"
| Line 2: | Line 2: | ||
== Description == | == Description == | ||
| − | [DuPont] | + | [DuPont] Discovered in 1955, this spunbonded, olefin product was trademarked in 1967. Tyvek is 100% [[high density polyethylene|high density polyethylene]] without any fillers or binders. The fine, white, continuous filaments (0.5-10 microns) are bonded by heat and pressure. Tyvek is chemically stable, lightweight, durable, strong, lint-free, and acid-free. The fabric is resistant to wetting, but it allows transmission of moisture and vapors. It is widely used as a wear resistant, tear resistant, waterproof paper for banners, maps, and envelopes. Applications also include filtration, packaging, bookcovers, interleaving, clean room clothing, protective garments, and carpet backing. Tyvek is commonly seen as a protective barrier in new housing construction. In museums, the high-strength wrapping material is used a soft, lint-free, waterproof liner in packing crates and display cases. It is available in stiff (Type 10), soft (Type 14) and perforated (Type 16) forms. |
| − | |||
| − | |||
| + | [[File:681_2DS_7.jpg|thumb|Tyvek disposable articles]] | ||
== Synonyms and Related Terms == | == Synonyms and Related Terms == | ||
Tyvek@; Tyvek Hardwrap; Tyvek Softwrap; Crate liner | Tyvek@; Tyvek Hardwrap; Tyvek Softwrap; Crate liner | ||
| − | == | + | == Properties == |
| − | + | Resistant to acids, alkalis and most organic solvents. Fibers are 0.5-10 microns. Dimesnsionally stable and chemical resistant. | |
Degraded by [[Freon]], [[pine oil]], [[Turpentine (oil)|turpentine]], [[dichloromethane]], [[mineral spirits]], [[ligroin]], [[kerosene]], [[toluene]]. | Degraded by [[Freon]], [[pine oil]], [[Turpentine (oil)|turpentine]], [[dichloromethane]], [[mineral spirits]], [[ligroin]], [[kerosene]], [[toluene]]. | ||
| − | Waterproof, acid-free, lint-free, resistant to mold, mildew and insects. Melting point = 135 <sup>o</sup>C | + | Waterproof, acid-free, lint-free, resistant to mold, mildew, and insects. Shrinks at 118 C. Melting point = 135 <sup>o</sup>C |
| + | |||
| + | == Handling and Workability == | ||
| + | Tyvek is tear resistant but is easily cut with scissors or a knife. Water vapor can pass Tyvek, but liquid water cannot. | ||
| + | Tyvek can be bonded by ultrasonic welding or dielectric bonding. Heat sealing causes puckering as it often bonds to itself. | ||
| − | + | Dupont recommends water-based adhesives (starch, dextrin, animal glues, PVAC) over any synthetic solvent-based adhesives. | |
| + | [[[SliderGallery rightalign|MFA- Tyvek.jpg~FTIR]]] | ||
== Hazards and Safety == | == Hazards and Safety == | ||
Revision as of 17:45, 4 November 2018
Description
[DuPont] Discovered in 1955, this spunbonded, olefin product was trademarked in 1967. Tyvek is 100% High density polyethylene without any fillers or binders. The fine, white, continuous filaments (0.5-10 microns) are bonded by heat and pressure. Tyvek is chemically stable, lightweight, durable, strong, lint-free, and acid-free. The fabric is resistant to wetting, but it allows transmission of moisture and vapors. It is widely used as a wear resistant, tear resistant, waterproof paper for banners, maps, and envelopes. Applications also include filtration, packaging, bookcovers, interleaving, clean room clothing, protective garments, and carpet backing. Tyvek is commonly seen as a protective barrier in new housing construction. In museums, the high-strength wrapping material is used a soft, lint-free, waterproof liner in packing crates and display cases. It is available in stiff (Type 10), soft (Type 14) and perforated (Type 16) forms.
Synonyms and Related Terms
Tyvek@; Tyvek Hardwrap; Tyvek Softwrap; Crate liner
Properties
Resistant to acids, alkalis and most organic solvents. Fibers are 0.5-10 microns. Dimesnsionally stable and chemical resistant.
Degraded by Freon, Pine oil, turpentine, Dichloromethane, Mineral spirits, Ligroin, Kerosene, Toluene.
Waterproof, acid-free, lint-free, resistant to mold, mildew, and insects. Shrinks at 118 C. Melting point = 135 oC
Handling and Workability
Tyvek is tear resistant but is easily cut with scissors or a knife. Water vapor can pass Tyvek, but liquid water cannot. Tyvek can be bonded by ultrasonic welding or dielectric bonding. Heat sealing causes puckering as it often bonds to itself.
Dupont recommends water-based adhesives (starch, dextrin, animal glues, PVAC) over any synthetic solvent-based adhesives.
Hazards and Safety
Chemically stable.
Additional Information
DuPont: Tyvek Website
Sources Checked for Data in Record
- Preparation, Art Handling, Collections Care Information Network (PACCIN)
- Rosalie Rosso King, Rosalie Rosso King, Textile Identification, Conservation, and Preservation, Noyes Publications, Park Ridge, NJ, 1985
- Book and Paper Group, Book and Paper Group, Paper Conservation Catalog, AIC, 1984, 1989
- Pam Hatchfield, Pam Hatchfield, Pollutants in the Museum Environment, Archetype Press, London, 2002
- Meredith Montague, Meredith Montague, contributed information, 1998
- Website address 1, Website address 1 Comment: AMOL reCollections Glossary -http://amol.org.au/recollections/7/c/htm