Difference between revisions of "Acrylonitrile butadiene styrene"
| Line 8: | Line 8: | ||
Examples: Abson; Cycolac | Examples: Abson; Cycolac | ||
| − | |||
[[[SliderGallery rightalign|aaiABS.jpg~FTIR]]] | [[[SliderGallery rightalign|aaiABS.jpg~FTIR]]] | ||
Revision as of 06:44, 21 July 2020
Description
A family of Thermoplastic polymers prepared by either grafting Styrene and Acrylonitrile onto an elastomeric Polybutadiene backbone or by mechanically blending rubber copolymer matrices of styrene-acrylonitrile with butadiene-acrylonitrile. Varying the ratios of the three monomers produces a wide range of properties. Acrylonitrile provides resistance to chemicals, high temperatures, and creep deformation while butadiene adds toughness and styrene gives high modulus of elasticity and low cost. The standard grade of ABS resin is strong, resilient, and difficult to break. The polymer can be injection molded or extruded into numerous shapes. ABS resin is used for appliances, automobile parts and fittings, telephones, radios, televisions, pipes and conduits, luggage, boats, toys, and bottles.
Synonyms and Related Terms
ABS; acrylonitrile-butadiene-styrene resin; resina de acrilonitrilo-butadieno-estireno (Esp.); resina de acrilonitrilo-butadieno-estireno (Port.)
Examples: Abson; Cycolac
Applications
Personal Risks
Combustible, slow-burning, generates smoke.
ABS: [Safety Data Sheet]
Collection Risks
Links to Oddy Test results posted on AIC Wiki Materials Database Pages for individual materials below
° Makerbot Industries ABS, Dark Sanguine Red Tested in 2017
° Makerbot Industries ABS, white Tested in 2017
° Makerbot Industries ABS, white Tested in 2017
° Makerbot Industries ABS, Dark Sanguine Red Tested in 2017
Environmental Risks
Physical and Chemical Properties
- Resistant to water, salts and oils
- May be degraded by oxidizing acids and many organic solvents (aromatics, ketones, and alcohols).
Comparisons
General Characteristics of Polymers
Physical Properties for Selected Thermoplastic Resins
Resources and Citations
- G.S.Brady, Materials Handbook, McGraw-Hill Book Co., New York, 1971 Comment: p. 12
- Pam Hatchfield, Pollutants in the Museum Environment, Archetype Press, London, 2002
- Sharon Blank, An introduction to plastics and rubbers in collections, Studies in Conservation, 35, 53-63, 1990
- Theodore J. Reinhart, 'Glossary of Terms', Engineered Plastics, ASM International, 1988