Difference between revisions of "Camger 1-175 Polyglase Environmental Coating"
| Line 1: | Line 1: | ||
==Description== | ==Description== | ||
| − | Camger Coating Systems Inc. | + | [Camger Coating Systems Inc.] A protective coating formulated with an aliphatic urethane and poly(propylene glycol). Camger 1-175 is designed to provide a barrier coating to minimize off-gassing. The preparation does not contain any solvents and the dried coating is resistant to abrasion, chemicals and hydrolysis. |
| − | |||
| − | + | Camger was originally made in two different formulations: Polyglase 1-175 and 1-146. | |
| − | + | 1-175 was the formulation that was originally developed and tested for conservation use, but 1-146 was very similar in formulation and cost. For a period the company kept 1-146 but discontinued the 1-175, then later restarted production of 1-175. Camger 1-175 has shown excellent adhesion properties to a wide variety of substrates such as, solid woods, particleboard, Medite II. | |
| − | Camger | ||
| − | 1-175 was the formulation that was originally developed and tested for conservation use, but 1-146 was very similar in formulation and cost. For a period the company kept 1-146 but discontinued the 1-175, then later restarted production of 1-175. | ||
| − | + | == Synonyms and Related Terms == | |
| − | + | Polyglase 1-175; Camger 1-146 | |
==Applications== | ==Applications== | ||
* Coating - Clear Gloss Waterborne Finish | * Coating - Clear Gloss Waterborne Finish | ||
| Line 26: | Line 23: | ||
== Physical and Chemical Properties == | == Physical and Chemical Properties == | ||
| − | pH-value at 25 °C (77 °F): 7 - 8 | + | * pH-value at 25 °C (77 °F): 7 - 8 |
| − | Melting point/Melting range: Undetermined. | + | * Melting point/Melting range: Undetermined. |
| − | Boiling point/Boiling range: 100 °C (212 °F) | + | * Boiling point/Boiling range: 100 °C (212 °F) |
| − | Flash point: >201 °C (>393.8 °F) | + | * Flash point: >201 °C (>393.8 °F) |
| − | Vapor pressure at 20 °C (68 °F): 23 hPa (17.3 mm Hg) | + | * Vapor pressure at 20 °C (68 °F): 23 hPa (17.3 mm Hg) |
| − | Density at 20 °C (68 °F): 1.026 g/cm³ (8.56197 lbs/gal) | + | * Density at 20 °C (68 °F): 1.026 g/cm³ (8.56197 lbs/gal) |
| − | Solubility in / Miscibility with Water: Not miscible or difficult to mix. | + | * Solubility in / Miscibility with Water: Not miscible or difficult to mix. |
| − | VOC content: 1.6 g/l / 0.01 lb/gl | + | * VOC content: 1.6 g/l / 0.01 lb/gl |
==Working Properties== | ==Working Properties== | ||
| − | Instructions for use: Mix well before using. This product is made ready to use. If thinning is necessary use small amounts of water. | + | Instructions for use: Mix well before using. This product is made ready to use. If thinning is necessary use small amounts of water. It can be applied by either spraying or brushing (with a foam brush). Two coats are recommended for protection. Sanding is recommended between coats. |
| − | + | Typical dry times are 2-3 hours, but full-cure can take up to a week to harden from a soft coating. | |
No special requirements for storage or handling. | No special requirements for storage or handling. | ||
==Forms and Sizes== | ==Forms and Sizes== | ||
| + | Available in gloss (1-175) or satin (1-175-50) | ||
== Resources and Citations == | == Resources and Citations == | ||
| + | * Camger Coating Systems Inc. [http://www.camger.com/coatings.htm website] | ||
* Camger: [http://www.camger.com/pds/1-175pds.pdf Product Sheet] | * Camger: [http://www.camger.com/pds/1-175pds.pdf Product Sheet] | ||
Revision as of 13:13, 24 October 2020
Description
[Camger Coating Systems Inc.] A protective coating formulated with an aliphatic urethane and poly(propylene glycol). Camger 1-175 is designed to provide a barrier coating to minimize off-gassing. The preparation does not contain any solvents and the dried coating is resistant to abrasion, chemicals and hydrolysis.
Camger was originally made in two different formulations: Polyglase 1-175 and 1-146. 1-175 was the formulation that was originally developed and tested for conservation use, but 1-146 was very similar in formulation and cost. For a period the company kept 1-146 but discontinued the 1-175, then later restarted production of 1-175. Camger 1-175 has shown excellent adhesion properties to a wide variety of substrates such as, solid woods, particleboard, Medite II.
Synonyms and Related Terms
Polyglase 1-175; Camger 1-146
Applications
- Coating - Clear Gloss Waterborne Finish
- Sealant for wood products used in interior of exhibition cases
- Gluing seams and as edge sealant for case materials (Field Museum)
Personal Risks
Not classified as hazardous under OSHA Haz-Com Standard (29 CFR 1910.1200), GHS
SDS obtained by contacting the company (no web link available)
Collection Risks
Environmental Risks
Environmental precautions: No special measures required. Smaller quantities can be disposed of with household waste.
Physical and Chemical Properties
- pH-value at 25 °C (77 °F): 7 - 8
- Melting point/Melting range: Undetermined.
- Boiling point/Boiling range: 100 °C (212 °F)
- Flash point: >201 °C (>393.8 °F)
- Vapor pressure at 20 °C (68 °F): 23 hPa (17.3 mm Hg)
- Density at 20 °C (68 °F): 1.026 g/cm³ (8.56197 lbs/gal)
- Solubility in / Miscibility with Water: Not miscible or difficult to mix.
- VOC content: 1.6 g/l / 0.01 lb/gl
Working Properties
Instructions for use: Mix well before using. This product is made ready to use. If thinning is necessary use small amounts of water. It can be applied by either spraying or brushing (with a foam brush). Two coats are recommended for protection. Sanding is recommended between coats.
Typical dry times are 2-3 hours, but full-cure can take up to a week to harden from a soft coating.
No special requirements for storage or handling.
Forms and Sizes
Available in gloss (1-175) or satin (1-175-50)
Resources and Citations
- Camger Coating Systems Inc. website
- Camger: Product Sheet