Polyethylene

From CAMEO
Jump to navigation Jump to search
MFA Acc. #: 2004.2110

Description

A thermoplastic polymerin the polyolefin familywith a base formula of [-CH2-]n. Ethylene was first polymerized in 1933 by ICI in England and was commercially released as Alkathene in 1939. In 1954, Karl Ziegler developed a process for high molecular weight polyethylene that allowed it to be spun into fibers, molded into durable but flexible forms and cast as tough thin sheets. Polyethylene made by the original process is now called Low density polyethylene (LDPE; density = 0.92, melting pt=110-120 C) because if has extensive branching resulting in a softer, more flexible product with low tensile strength. Polymers made by the later Ziegler or Phillips processes are called High density polyethylene or (HDPE; density=0.95-0.96, melting pt=130-138C) because they lave a low degree of branching resulting in high tensile strength. HDPR tends to have a longer lifespan that LDPE. In general, polyethylenes are translucent waxy polymers with good impact strength that are widely used for packaging, coatings, liners, plastic sheets, wire coatings, underwater cables, containers, waste bags, toys, and squeeze bottles. Small amounts of additives (antioxidants, light stabilizers, slip agents, antistatic agents, flame retardants, pigments, etc.) are typically added to the final products. Polyethylene is recyclable and many products, such as Tyvek, contain the recycled polymer.

Examples include:

Polyethylene Types Forms Products
High-Density Polyethylene (HDPE) Closed cell foam

(non-crosslinked)

Sealed Air Corp. formerly Dow; Ethafoam 180, 220, 400, 600, 900, 180 AS, 220 AS

Pregis Corp; PolyPlank

High-Density Polyethylene (HDPE) Closed-cell foam (cross-linked) Sekisui Voltek; Volara

Zotefoams Ltd.; Plastazote MicroCell

High-Density Polyethylene (HDPE) Spun bonded fiber DuPont; Tyvek-10(stiff), Tyvek-14(soft),
Tyvek-16(perforated)
Low-Density Polyethylene (LDPE)

Closed cell foam (non-crosslinked)

Sealed Air Corp.(Cellu-Cushion; Celluplank; Cell-Aire; Stratocell
Low-Density Polyethylene (LDPE) Plastic film with sealed bubbles Sealed Air Corp (Bubble Wrap, Polycap, Aircap)

Pregis (Astro-Cell; Astro-Bubble; Astro-Suprabubble)

Some brands available in Antistatic (Pink), Flame-retardant (Blue), and Recycled (Green).

Archival Quality Polyethylene Bags
Ethafoam

Synonyms and Related Terms

PE; polietileno (Esp.); polythylne (Fr.); polietilene (It.); polietileno (Port.); polyolefin; polythene; alkathene

Examples: Volara; Ethafoam; Tyvek [DuPont]; Hi Core [Matra Plast]; Tupperware; Lennite; Corrulite; Cellu-Cushion; Trirod; Ethalux; Plastazoate; Colara; Correx

FTIR

AaiP-ETHYLN.jpg

Applications

  • Storage containers
  • Transparent sheets and films
  • Foams
  • Hot-melt adhesives
  • Spun-bonded fibers products

Personal Risks

Dow Corning: SDS

Collection Risks

  • Degraded by ultraviolet light and sulfur containing pollutants.
  • May contain additives (such as antioxidant BHT) that can migrate to adjacent materials and cause staining.
  • Not as chemically stable as polyester films and not as clear.
  • Not susceptible to hydrolysis.4 “Highly hydrophobic polymers such as polyethylene and polypropylene are unlikely to have hydrolysable chemical groups, so are not subject to hydrolytic breakdown” (Shashoua 2008:175).

Environmental Risks

Physical and Chemical Properties

  • Soluble in xylene, trichlorobenzene, decane at room temperature and most chlorinated and aromatic solvents when gently heated.
  • Insoluble in acetone, diethyl ether.
  • Burns with yellow flame and blue center that smells like paraffin.
  • Floats on water.
  • CAS = 9002-88-4
  • Melting Point = 110-138
  • Density = 0.92-0.96
  • Refractive Index = 1.52

Working Properties

Less transparent than polypropylene. Polyethylene has good chemical resistance.

Comparisons

Physical Properties for Selected Thermoplastic Resins

General Characteristics of Polymers

Resources and Citations

  • G.S.Brady, Materials Handbook, McGraw-Hill Book Co., New York, 1971 Comment: p. 304
  • Marjorie Shelley, The Care and Handling of Art Objects, The Metropolitan Museum, New York, 1987
  • Richard S. Lewis, Hawley's Condensed Chemical Dictionary, Van Nostrand Reinhold, New York, 10th ed., 1993
  • Rosalie Rosso King, Textile Identification, Conservation, and Preservation, Noyes Publications, Park Ridge, NJ, 1985
  • Matt Roberts, Don Etherington, Matt Roberts, Don Etherington, Bookbinding and the Conservation of Books: a Dictionary of Descriptive Terminology, U.S. Government Printing Office, Washington DC, 1982
  • Pam Hatchfield, Pollutants in the Museum Environment, Archetype Press, London, 2002
  • Thomas C. Jester (ed.), Twentieth-Century Building Materials, McGraw-Hill Companies, Washington DC, 1995
  • Random House, Webster's Encyclopedic Unabridged Dictionary of the English Language, Grammercy Book, New York, 1997
  • M.Kaufman, The First Century of Plastics, The Plastics and Rubber Institute, London, 1963
  • Website address 1 Comment: www.nswpmith.com.au/historyofplastics.html
  • The Dictionary of Art, Grove's Dictionaries Inc., New York, 1996 Comment: "Plastics"
  • Sharon Blank, An introduction to plastics and rubbers in collections, Studies in Conservation, 35, 53-63, 1990

Retrieved from "https://cameo.mfa.org/index.php?title=Polyethylene&oldid=77203"