Difference between revisions of "PEC-12"

Latest revision as of 12:57, 21 October 2022

Description

[Photographic Solutions Inc., MA] A registered trademark for a photographic emulsion cleaner based on a hydrocarbon solvent formulation. PEC-12® was introduced commercially in 1983. The solvent mixture is designed to remove non-water based stains (fingerprints, grease, ink, adhesives, wax) from photographic emulsions.

Synonyms and Related Terms

PEC 12 photo and slide cleaner

Risks

Flammable. Flash point = 24C (75F).
Use with adequate ventilation.
Manufacturer warning: Unhardened or inherently soft emulsions such as inkjet or dye-sub prints, chromogenic films, dye transfer matrix film, albumen, glass plate emulsion, and Polachrome instant slide film should NOT be cleaned with PEC-12
Photographic Solutions: SDS

Physical and Chemical Properties

Hygroscopic.
Melting Point = -77.4 C
Density = 0.824 g/ml
Boiling Point = 73.8 C

Resources and Citations

Photographic Solutions: Webinfo

@@ Line 7: / Line 7: @@
 PEC 12 photo and slide cleaner
-== Other Properties ==
+== Risks ==
-Hygroscopic.
+* Flammable.  Flash point = 24C (75F).
+* Use with adequate ventilation.
+* Manufacturer warning: Unhardened or inherently soft emulsions such as inkjet or dye-sub prints, chromogenic films, dye transfer matrix film, albumen, glass plate emulsion, and Polachrome instant slide film should NOT be cleaned with PEC-12
+* Photographic Solutions: [https://photosol.com/wp/wp-content/uploads/PEC-12-SDS.pdf SDS]
-{| class="wikitable"
+== Physical and Chemical Properties ==
-|-
-! scope="row"| Melting Point
-| -77.4
-|-
-! scope="row"| Density
-| 0.824
-|-
-! scope="row"| Boiling Point
-| 73.8
-|}
-== Hazards and Safety ==
+* Hygroscopic.
+* Melting Point = -77.4 C
+* Density = 0.824 g/ml
+* Boiling Point = 73.8 C
-Flammable.  Flash point = 24C (75F). Use with adequate ventilation.
+==Resources and Citations==
-Manufacturer warning: Unhardened or inherently soft emulsions such as inkjet or dye-sub prints, chromogenic films, dye transfer matrix film, albumen, glass plate emulsion, and Polachrome instant slide film should NOT be cleaned with PEC-12
+* Photographic Solutions: [http://www.photosol.com/tecpec.htm Webinfo]
-Photographic Solutions: [http://www.photosol.com/MSDS%20-%20PEC%20101901.pdf MSDS]
-== Additional Information ==
-Photographic Solutions: [http://www.photosol.com/tecpec.htm Webinfo]
 [[Category:Materials database]]