Magic sculpt

This record is under construction!!

Description

[Wesco Enterprises] A two-part epoxy putty used for fine sculpting, and model making, and durable household repairs. Magic-Sculpt putties are based on a 50:50 mix ratio of an epoxy resin base (part A) and an amine catalyst/hardener (Part B). The uncured putties have a smooth, moldable consistency and all provide very strong adhesion to any type of substrate. Once the two-parts are completely mixed, there is about 1-3 hours working time for shaping the putty. The mixed product cures in 12 hours at room temperature without the need for an oven or UV light. After curing, Magic-Sculpt has a smooth texture and rock-hard finish. It accepts all types of paint.

There are three types of Magic-Sculpt 2-part putties and pastes. All on based on the following materials:

Part A (Resin Component):

• Base Resin: Bisphenol-A/Epichlorohydrin epoxy resin
• Fillers: Talc (magnesium silicate hydrate) and blended silicates

Part B (Hardener Component):

• Curing Agent: Triethylenetetramine (TETA) or a structurally similar aliphatic polyamine catalyst that triggers exothermic cross-linking when mixed
• Modifying Agents: A blend of process oils to keep the hardener pliable and control the tackiness
• Fillers: The same kaolin and talc silicate base found in Part A to guarantee even dispensing and uniform density

	Magic-Sculpt	Magic-sculpt fast	Magic-Smooth
Primary use	sculpting and major fabrication		Surface coatings, taxidermy, and foam coating
Working time (after complete mixing)	45 -180 min	6-10 minutes	45 -180 min
Cure time	12 hours	30-45 mintues	12 hours
application	Stays put on vertical surfaces as a heavy mass		Flows slightly, eliminating brush or tool marks
Consistency	Thick, dough-like, similar to modeling clay or chewing gum		Thin, runny, slightly thicker than Vaseline; self-leveling
Self-leveling	no	no	yes
Finish after cure	holds crisp, fine structural detail		glassy finish

Resources and Citations

• The Compleat Sculptor: [The Compleat Sculptor Magic-Sculpt and Magic-Smooth]
• TAP Plastics: Magic-Smooth
• TAP Plastics: Magic-Sculpt