Dowsil silicone sealants
Description
[Dow] Dow produces numerous types of one-part, neutral-cure Silicone sealant:Silicone materials that can be used as adhesives/sealants. These room temperature vulcanizing (RTV) silicones were introduced in the 1960s and cure upon exposure to atmospheric moisture. There are two type of neutral cure RTS silicones. The first if an alkoxy neutral-cure that releases methanol upon cure. The alkoxy neutral cure silicones are considered suitable for use on all types of metal without risk of corrosion. The second type is an oxime neutral-cure silicones that releases methyl ethyl ketoxime. These withstand temperature better than alkoxy-cure but can cause stress-cracking in some plastic boards, such as polycarbonate and acrylics.
General properties for Dowsil silicones include:
- Stability over a wide temperature range – When fully cured, most can be used at temperatures ranging from -85° to 599°F (-65° to 315°C).
- Weather resistance – High resistance to UV rays, radiation and weather prevents our products from hardening, cracking, crumbling, drying and becoming brittle.
- Chemical stability – Do not readily degrade, even under long-term exposure to many chemicals and atmospheric pollutants.
- Good bond strength – Provide good adhesion to a wide variety of industrial materials, including glass, ceramics and wood masonry; painted surfaces; and many metals and plastics.
- Low flammability – In fire conditions, silicone adhesives/sealants are reluctant to burn. Many products comply with UL flammability standards.
| Commercial name | Cure type | Properties | Features (comments) | Applications | Characteristics and Risks | Oddy tests | Product website | Composition and fillers | |
|---|---|---|---|---|---|---|---|---|---|
| Dowsil 580 Neutral cure | Silicone; oxime neutral cure; one component | General Glazing; Weathersealing applications for windows, doors, glass, metal, masonry | Will not corrode galvanized/zinc-coated steel or attack concrete; Resistant to weathering, UV, vibration, moisture, ozone, temperatures, pollutants, detergents and solvents; Long life reliability; cured sealant stays rubbery from -50°C to +150°C without tearing, cracking, drying out or becoming brittle; not recommended for water immersion; do not use on structural glazing; may discolor copper and brass; cannot be painted; not for use on polycarbonates | AWMM 2007 (T); AWMM 2008 (T) | Dowsil 580 | Silicone elastomer (with petroleum distillates, 2-Butanone (methylsilylidyne)trioxime; N-(3-(Trimethoxysilyl) propyl)-1,2- ethanediamine; Vinyltri (methylethylketoxime) silane; Bis[(2-ethyl-2,5-dimethylhexanoyl)oxy](dimethyl)stannate) | |||
| Dowsil 737 Neutral Cure | Silicone; oxime neutral cure; one component | Substitute for mechanical fasteners on large and small appliances; Adhering plastic moldings to plastic substrates for trim applications; Waterproofing electrical components | Oxime cure in the presence of moisture; adhesion to most material; excellent weather resistance; Not recommended for water immersion, or use on painted surface; may discolor brass, or copper; may stress craze polycarbonates | MMA 2016 (U); BKM 2017 (U); BKM 2018 Px4) BKM 2018 (U) | Dowsil 737 | Silicone elastomer( 2-Butanone (methylsilylidyne)trioxime; N-(3-(Trimethoxysilyl) propyl)-1,2- ethanediamine; Vinyltri (methylethylketoxime) silane; Bis[(2-ethyl-2,5-dimethylhexanoyl)oxy](dimethyl)stannate) | |||
| Dowsil 739 RTV | Silicone; moisture cure; one component | Adheres well to unprimed metals, ceramics and glass and some plastics; does not adhere to Teflon, polyethylene, polypropylene, or highly plasticized plastics or rubbers. | Single component, moisture cure, RTV with good adhesion; normally sold in syringes and cartridges; | MMA 2016 (P) | Dowsil 739 | Silicone elastomer | |||
| Dowsil 791 Weatherproof Sealant | Silicone; moisture cure; one component | good for inside display envelope: glass and metal joins; glass and glass joins; Goppion uses black, grey, white due to aesthetic reasons (transparent caulks yellow within 5 years) | General weather-sealing joints; glazing and curtain wall seals; building façade seals | Single component, neutral curing silicone elastomeric sealant for weather-sealing applications; | MMA 2016 (T); AMNH 2019 (Tx2); MMA 2021 (T); white is unsuitable | https://www.dow.com/en-us/pdp.dowsil-791-weatherproofing-sealant.04082594h.html#overview | Silicone elastomer | ||
| Dowsil 795 Building Sealant | Silicone; moisture cure; one component | extra thick; skins over too quickly | Structural and nonstructural glazing; for most new construction and remedial sealing applications; weather sealing of most common construction materials including glass, aluminum, steel, painted metal, EIFS, granite and other stone, concrete, brick and plastics | Single component, neutral curing; Highly resistant to weather, UV and temperature extremes; adheres to wide variety of materials; not recommended for water immersion, or wet or cold surfaces; not paintable | AWMM 2008 (U); MMA 2016 (Px2); MMA 2020 (Ux2); MMA 2021 (T) | https://www.dow.com/en-us/pdp.dowsil-795-silicone-building-sealant.01595717z.html#tech-content | Silicone elastomer with Diisopropoxydi(ethoxyacetoacetyl)titanate | ||
| Dowsil 9-1374 Silicone sealant | Silicone; alkoxy neutral cure; one component | Used for formed in place gaskets; provides strong flexible bond for movable or expanding joints, such as when bonding materials with different thermal expansion rates such as glass to metal, or glass to plastic or metal to plastic | Single component, translucent, RT, alkoxy neutral moisture cure, silicone sealant. | MMA 2016 (Tx2) | https://www.dow.com//en-us/pdp.dowsil-9-1374-silicone-sealant.03119556h.html#overview | Silicone elastomer | |||
| Dowsil 3145 RTV Mil-A-46146 Adhesive / Sealant | Silicone; moisture cure; one component | Skin-over time = 15 min; | may be hard to work with (one anecdote of it being very hard to work with); requires experienced person to apply and clean up; viscous, does not flow | Sealing openings in modules and housings; Adding mechanical stability to individual components; adheres to glass and nylon | Good adhesion to many reactive metals, ceramics and glass, as well as to selected laminates, resins and plastics. However, good adhesion cannot be expected on non-reactive metal substrates or non-reactive plastic surfaces such as Teflon, polyethylene or polypropylene. |
AWMM 1988 (P); BKM 2016 (Px2); BKM 2017 (Px2); AWNH 2019 (T) | https://www.dow.com//en-us/pdp.dowsil-3145-rtv-mil-a-46146-adhesive-sealant.01059548z.html#tech-content | Polydimethylsiloxane (with Methyltrimethoxysilane, Octamethyl Cyclotetrasiloxane, Methanol | |
| Dowsil 7091 Adhesive Sealant | Silicone; moisture cure; one component | Skin-over time = 15 min; | Click Netherfield mentioned this one as one they use | for applications which demand a strong but flexible bond, such as when bonding materials with differing thermal expansion rates, e.g. glass to metal or glass to plastic | Single component alkoxy cure with moisture; for applications which demand a strong but flexible bond, such as when bonding materials with differing thermal expansion rates, e.g. glass to metal or glass to plastic; For maximum adhesion, the use of DOWSIL™ 1200 OS Primer is recommended. | BKM 2016 (P); BKM 2017 (P); MMA 2017 (P); AMNH 2019 (T) | https://www.dow.com//en-us/pdp.dowsil-7091-adhesive-sealant.02436621h.html#tech-content | Silicone elastomer (with Diisopropoxydi(ethoxyacetoacetyl)titanatel) | |
| Dowsil 993 | Click Netherfield mentioned this one as one they use | ||||||||
| Silastic 1080 RTV | Dow Corning | Silicone; one component | Provides reliable, long-lasting bonds with a wide range of substrates, including ceramics, metals, glass and filled plastics, | long service life, wide operating temperatures, resistance to oils and solvents; water and steam resistant | AWMM 1988 (P) | [1] | Silicone elastomer |
Personal Risks
- Wear eye, hands, and respiratory protection.
- SDS: sheets
Collection Risks
Literature indicates the sealant has no significant volatile components. Some silicones have curing byproducts of ethanol, peroxides or ketones. Risk to museum collections could occur if an object comes in contact with the sealant causing possible staining or adhesion (if not fully cured).
Resources and Citations
- Antala: Dow Silicone Selection guide