Difference between revisions of "Lascaux Welding Powder"

From CAMEO
Jump to navigation Jump to search
m (Text replace - "== Authority ==" to "== Sources Checked for Data in Record ==")
 
Line 5: Line 5:
 
== Synonyms and Related Terms ==
 
== Synonyms and Related Terms ==
  
Lascaus Polyamide Textile Welding Powder No. 5065
+
Lascaux Polyamide Textile Welding Powder No. 5065
  
{| class="wikitable"
+
==Physical and Chemical Properties==
|-
 
! scope="row"| Melting Point
 
| 90
 
|}
 
  
== Additional Information ==
+
* Melting Point = 90-100 C
  
Talas: [http://talasonline.com/photos/instructions/lascaux_textile_welding.pdf Information sheet]
+
==Working Properties==
 +
* Easiest application is to stick a hot soldering needle into the powder and then apply the melted polyamide.  
 +
* An alternative consists of melting the polyamide powder with an iron between two sheets of silicone coated polyester film, in order to obtain a coat of approx. 1-2 mm thickness. After cooling, the polyamide coat is cut in very thin strips. These strips are then used together with the soldering needle to weld the threads.
  
== Sources Checked for Data in Record ==
+
==Resources and Citations==
 +
 
 +
* Talas: [https://www.talasonline.com/Lascaux-Welding-Powder Lascaux welding powder]
  
 
* Conservation Support Systems, Catalog, 1997
 
* Conservation Support Systems, Catalog, 1997

Latest revision as of 16:15, 29 September 2022

Description

[Alois K Diethelm, Switzerland] A trademark for a hot-melt adhesive composed of nylon 12 thermoplastic resin. Lascaux Welding Powder #5065 is used for mending tears in textile, canvas, and leather products.

Synonyms and Related Terms

Lascaux Polyamide Textile Welding Powder No. 5065

Physical and Chemical Properties

  • Melting Point = 90-100 C

Working Properties

  • Easiest application is to stick a hot soldering needle into the powder and then apply the melted polyamide.
  • An alternative consists of melting the polyamide powder with an iron between two sheets of silicone coated polyester film, in order to obtain a coat of approx. 1-2 mm thickness. After cooling, the polyamide coat is cut in very thin strips. These strips are then used together with the soldering needle to weld the threads.

Resources and Citations

  • Conservation Support Systems, Catalog, 1997