3M Fastbond Contact Adhesive 30NF

Description

[3M] A low-odor, water-based contact adhesive composed Fastbond 30NF designed to have high strength and bond most foamed plastics, laminates, wood, and canvas to themselves and to each other.

Synonyms and Related Terms

Green glue

Applications

Exhibit: case construction; typically used on surfaces of casework and other exhibit structures; use this product to adhere high pressure laminate material/ barrier material (e.g. Formica) to the surface of structural and surface material. Can be used to “seal” the MDF.

Can be used to adhere materials together, including PVC Sheet, Metal Sheet, Foam Sheeting, and all natural products.

Personal Risks

Apply in a well ventilated area, respirator may be required.

3M Safety Data Sheet: [1]

Collection Risks

From wiki: 1996 GCI Permanent, 2019 MMA Temporary.

Environmental Risks

Listed as Eco-friendly and a Green Guard product from 3M

Working Properties

• shelflife of 6 months once opened*

Apply to both surfaces as evenly as possible (roll or spray on, 2 coats), let it dry, then place 2 surfaces in contact with each other. Apply consistent even pressure for best adhesion. Consistency of product formula (has not changed since released by 3M) and thin application layer are both positive reasons to select this product over similar products from other brands. Works well on foams, pvc sheeting, wood and other natural products, as well as some metal sheeting. Needs to be applied in a well ventilated area, respirator may be required. Gloves and eye protection should be worn. Clean up while wet with mild soap and water. Once dry, the product can only be removed using acetate or similar chemical compound

Forms and Sizes

Purchase through 3M product distributors in quarts, half gallons, gallons and five gallon containers

Resources and Citations

• 3M Fastbond Contact Adhesive Technical Data