Apoxie 2-part resins

Description

[Aves Studio LLC] A two-part epoxy putty that can be used fabricate and rebuild parts. Apoxie putties are based on a 50:50 mix ratio of an epoxy resin base (part A) and an amine catalyst/hardener (Part B). The uncured Apoxie putties have a smooth, moldable consistency and all provide very strong adhesion to any type of substrate. Once the two-parts are completely mixed, there is about 1-3 hours working time for shaping the putty. The mixed product cures in 24 hours at room temperature without the need for an oven or UV light and can even cure under water. After curing, Apoxie has a rock hard, waterproof finish that can be sanded, drilled or machined without chipping, cracking or flaking. It accepts all types of paint.

There are four types of Apoxie 2-part putties and pastes. All on based on the following materials:

Part A (Resin Component):

• Base Resin: Bisphenol-A/Epichlorohydrin epoxy resin
• Fillers: Talc (magnesium silicate hydrate) and blended silicates

Part B (Hardener Component):

• Curing Agent: Triethylenetetramine (TETA) or a structurally similar aliphatic polyamine catalyst that triggers exothermic cross-linking when mixed
• Modifying Agents: A blend of process oils to keep the hardener pliable and control the tackiness
• Fillers: The same kaolin and talc silicate base found in Part A to guarantee even dispensing and uniform density

The slight variabilities in the four types of Apoxie putties are:

	Apoxie Sculpt	Super White Apoxie	Apoxie Clay	Apoxie Paste
Working time (after complete mixing)	1-3 hours	1 hour	2 hours	1-3 hours
Cure time	24 hours	24 hours	24 hours	24 hours
Colors	Natural, Green, Black, Pink, Red, Blue, White, Yellow, Brown, Orange, Silver-Grey & Bronze	Super white	Native and white	khaki
Consistency	smooth putty- like	firm putty-like	fine grain clay-like	thick batter-like
Self-leveling	some, depending on stage/time of set-up	none	little to none	some
Finish after cure	semi-gloss	semi-gloss	semi-gloss	semi-gloss; semi-translucent
Hardness after cure	hard	hard	hard	hard
Heat Tolerance after cure	325 F (163 C)	325 F (163 C)	300 F (149 )	300 F (149 )

Risks

• Non-hazardous
• Non-flammable

Physical and Chemical Properties

• Mixing ratio: 1:1 by weight or volume
• Insoluble in water but smooths/cleans with water
• Room temperature cure
• Zero percent shrinkage
• Freeze-thaw stable
• Electrically non-conductive
• Waterproof after curing

Resources and Citations

• Aves Studio: Aves Studio