Difference between revisions of "Jade 403"
| (4 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
Jade 403N | Jade 403N | ||
| − | + | ||
== Personal Risks == | == Personal Risks == | ||
| − | The adhesive is not classified as hazardous. The residual monomer is considered toxic. Use in a well-ventilated area. | + | * The adhesive is not classified as hazardous. |
| − | + | * The residual monomer is considered toxic. Use in a well-ventilated area. | |
| − | Jade 403 SDS [https://www.talasonline.com/images/PDF/MSDS/Jade-403-MSDS.pdf] | + | * Jade 403 SDS [https://www.talasonline.com/images/PDF/MSDS/Jade-403-MSDS.pdf] |
| − | == Collection | + | == Collection Risks == |
Jade 403 is a low level [[acetic acid]] emitter. It has been found to fall within an acceptable range for pH after aging. In dark aging tests, Jade 403 has been shown to emit [[ethyl acetate]], [[methyl acetate]], n-butanol, water, and dibutyl ether. In light aging tests, it emitted [[acetaldehyde]], ethyl acetate, methyl acetate, and water (Down et al 1996). Enclosures prepared with off-gassing materials, especially when large quantities of the materials are used, should be allowed to dry for three to four weeks before being used to enclose sensitive objects (Tétreault, 2017). | Jade 403 is a low level [[acetic acid]] emitter. It has been found to fall within an acceptable range for pH after aging. In dark aging tests, Jade 403 has been shown to emit [[ethyl acetate]], [[methyl acetate]], n-butanol, water, and dibutyl ether. In light aging tests, it emitted [[acetaldehyde]], ethyl acetate, methyl acetate, and water (Down et al 1996). Enclosures prepared with off-gassing materials, especially when large quantities of the materials are used, should be allowed to dry for three to four weeks before being used to enclose sensitive objects (Tétreault, 2017). | ||
| Line 20: | Line 20: | ||
° [http://www.conservation-wiki.com/wiki/Oddy_Test_Results:_Exhibition_Adhesives_and_Tapes#Jade4030001 Jade 403] tested in 2014 | ° [http://www.conservation-wiki.com/wiki/Oddy_Test_Results:_Exhibition_Adhesives_and_Tapes#Jade4030001 Jade 403] tested in 2014 | ||
| − | |||
| − | |||
== Physical and Chemical Properties == | == Physical and Chemical Properties == | ||
| − | Emulsion has 50% solids. Viscosity = 6000-7000 cps. | + | * Emulsion has 50% solids. Viscosity = 6000-7000 cps. |
| − | + | * Emulsion pH = 6.5-7.2 (manufacturer). | |
| − | Emulsion pH = 6.5-7.2 (manufacturer). | + | * Dried film swells in water, ethanol and toluene. |
| − | |||
| − | Dried film swells in water, ethanol and toluene. | ||
== Working Properties == | == Working Properties == | ||
| Line 38: | Line 34: | ||
== Resources and Citations == | == Resources and Citations == | ||
| − | + | * Emma Guerard, contributed information, MWG group, 2020. | |
* ''A Glossary of Paper Conservation Terms'', Margaret Ellis (ed.), Conservation Center of the Institute of Fine Arts, New York City, 1998 | * ''A Glossary of Paper Conservation Terms'', Margaret Ellis (ed.), Conservation Center of the Institute of Fine Arts, New York City, 1998 | ||
| Line 55: | Line 51: | ||
* Down, Jane L. “The evaluation of selected poly(vinyl acetate) and acrylic adhesives: A final research update.” ''Studies in Conservation'' 60, No. 1 (2015), 33-54. | * Down, Jane L. “The evaluation of selected poly(vinyl acetate) and acrylic adhesives: A final research update.” ''Studies in Conservation'' 60, No. 1 (2015), 33-54. | ||
| − | * Jean Tétreault. “Products Used in Preventive Conservation,” ''CCI Technical Bulletin''. Canadian Conservation | + | * Jean Tétreault. “Products Used in Preventive Conservation,” ''CCI Technical Bulletin''. Canadian Conservation Institute, Ottawa, No. 32 (2017). |
* “Jade 403” in [http://www.conservation-wiki.com/wiki/BPG_Adhesives#Jade_403 BPG Adhesives], AIC WIKI (accessed 6/2020). | * “Jade 403” in [http://www.conservation-wiki.com/wiki/BPG_Adhesives#Jade_403 BPG Adhesives], AIC WIKI (accessed 6/2020). | ||
| Line 64: | Line 60: | ||
| − | + | [[Category:Materials database]] [[Category:MWG]][[Category:Adhesives]][[Category: Adhesive: Water-based]] | |
| − | |||
| − | [[Category:Materials database]] [[Category:MWG]] | ||
Latest revision as of 12:25, 21 September 2022
Description
[Jade Adhesives, Chicago] A brand name for a white aqueous adhesive Emulsion containing Ethylene vinyl acetate (20/80) copolymer. Jade 403 may also contain small amounts of plasticizers, dispersion aids, defoamers and preservatives. Traces of Formaldehyde have been found (Down et al 1996). Jade 403N performed well among the six adhesives tested in the CCI Report No. 1603 on testing of polyvinyl acetate and acrylic adhesives (Down et al 1996).
Synonyms and Related Terms
Jade 403N
Personal Risks
- The adhesive is not classified as hazardous.
- The residual monomer is considered toxic. Use in a well-ventilated area.
- Jade 403 SDS [1]
Collection Risks
Jade 403 is a low level Acetic acid emitter. It has been found to fall within an acceptable range for pH after aging. In dark aging tests, Jade 403 has been shown to emit Ethyl acetate, Methyl acetate, n-butanol, water, and dibutyl ether. In light aging tests, it emitted Acetaldehyde, ethyl acetate, methyl acetate, and water (Down et al 1996). Enclosures prepared with off-gassing materials, especially when large quantities of the materials are used, should be allowed to dry for three to four weeks before being used to enclose sensitive objects (Tétreault, 2017).
Links to Oddy Test results posted on AIC Wiki Materials Database Pages for individual materials below
° Jade 403 tested in 2014
Physical and Chemical Properties
- Emulsion has 50% solids. Viscosity = 6000-7000 cps.
- Emulsion pH = 6.5-7.2 (manufacturer).
- Dried film swells in water, ethanol and toluene.
Working Properties
The Jade 403 emulsion may be applied with a brush, roller, or by extrusion. For proper viscosity and flow, it should be used at a room temperature of at least 72°F. The emulsion may be diluted with water. It should be stored between 60 and 100°F and not allowed to freeze.
Forms/Sizes
Emulsion is available in ½ pint, pint, quart, gallon, and 5-gallon containers.
Resources and Citations
- Emma Guerard, contributed information, MWG group, 2020.
- A Glossary of Paper Conservation Terms, Margaret Ellis (ed.), Conservation Center of the Institute of Fine Arts, New York City, 1998
- Marie Svoboda, Conservation Survey Index, unpublished, 1997
- Teri Hensick, contributed information, 1998
- Book and Paper Group, Paper Conservation Catalog, AIC, 1984, 1989
- Jane Down, Adhesive projects at the Canadian Conservation Institute, Preprints of the SSCR's 2nd Resins Conference, Sept. 1995, Scottish Society for Conservation & Restoration, Edinburgh
- Conservation Support Systems, Catalog, 1997
- Down, Jane L., Maureen A. MacDonald, Jean Tétreault and R. Scott Williams. “Adhesive Testing at the Canadian Conservation Institute: An Evaluation of Selected Poly(Vinyl Acetate) and Acrylic Adhesives,” Studies in Conservation 41, No. 1 (1996), 19-44.
- Down, Jane L. “The evaluation of selected poly(vinyl acetate) and acrylic adhesives: A final research update.” Studies in Conservation 60, No. 1 (2015), 33-54.
- Jean Tétreault. “Products Used in Preventive Conservation,” CCI Technical Bulletin. Canadian Conservation Institute, Ottawa, No. 32 (2017).
- “Jade 403” in BPG Adhesives, AIC WIKI (accessed 6/2020).
- The Jade 403 page on the Talas website contains links to product information, instruction, and safety data sheets (accessed 6/2020).
- The Jade 403 page on the Gaylord website contains and instructions sheet (accessed 6/2020).