Coating

From CAMEO
Revision as of 09:07, 16 October 2024 by MDerrick (talk | contribs)
Jump to navigation Jump to search
Coated wood soldier
MFA# 55.801

Description

A thin layer deposited or applied on the surface of an object (substrate). The primary purpose of applying a coating is to improve an objects critical properties and to create a protective barrier against deterioration of the surface. Secondary purposes may be aesthetic. Coatings may be applied as liquids, gases or solids e.g. powder coatings.

Examples of the types of materials are used for coatings include:

Often coatings are used to achieve multiple goals. For example, coatings can be formulated to:

  • Seal a surface, form a barrier, change color, produce or minimize texture, maintain surface appearance, be anti-corrosive, be anti-reflective, decrease friction, increase wearability, minimize light transmission, provide adhesion, prevent adhesion (non-stick), provide flame resistance, and to provide identification.

A major consideration for most coating processes is to control coating thickness and adhesion. Methods of achieving this range from a simple brush to expensive precision machinery.

  • Application processes include: draping, brushing, rolling, dipping, spraying, baking, shrink-wrapping, vapor deposition, electroplating, anodizing, printing and laminating.
Synthetic coatings Process Application Advantages Disadvantages
Acrylic Premixed solutions of acrylic polymer bits dispersed in water; cures by drying, multiple options for clear or colored coatings. May emit acetic acid vapors (allow 4 weeks cure); cleans with soap and water while wet Cost effective, dry quickly easy to use, resists weathering and fading, environmentally friendly Surface must be well-prepared for optimal adhesion
Alkyd Oil-modified polyester that cures through oxidation May release peroxides and carboxylic acids; cleans with solvent based products Glossy finish, robust; resistant to weathering and wear; glossy finish Slow drying, strong odor during application
Ceramic coating Resin made of silica and titanium dioxide applied using a spray gun, chemically bonds to paint below Primarily used as a high gloss top coat for autos Improves durability and wear resistance; has low surface tension; Cannot be used directly on a substrate; provides little protection from tensile or compressive stress
Epoxy Two component solution (epoxy resin and hardener) carefully mixed prior to used; water-based options available Careful mixing and curing required Excellent for metal surfaces, high moisture resistance; resistant to corrosion and damage Surface must be well-prepared; coatings are sensitive to UV light and temperature; low flexibility
Laminate A multilayer material or a film used to provide a protective layer Plastic or aluminum sheets adhered to the substrate Provide a barrier to moisture or volatile organic The film must be uniformly sealed without any holes or gaps
Polyaspartic Polyurea coatings formed by reaction with polyisocyanates and aspartic esters Buildings, bridges, automobiles Cures rapidly; highly durable, resistant to weathering and wear; maintains high gloss, does not yellow Surface must be well-prepared to ensure adhesion
Polyester Synthetic resin that hardens with a catalyst Strong, durable surface; withstands abrasion, weathering and wear; flexibility minimizes cracking Application requires precise control over temperature and humidity to fully cure.
Polyurethane (aliphatic) Pre-mixed solution of a polyol with an isocyanate; cures with moisture in air; water-based options available Must be cured completely at optimal conditions of moisture and temperature; isocyanate is a carcinogen Often used as a top coat, highly durable, resistant to wear and weather; excellent gloss and color retention; low VOC formulations available
Powder Coating An electrostatic process to adhere powder-based substance onto a charged metal surface followed by heat curing. Metals, household applieances, automobile parts Coatings are durable with many color options; no solvents are used thus no VOCs emissions; typically used on metals Requires spray booths and ovens, difficult to achieve thin coatings
Silicone Oligosiloxanes dispersed in water that dry into a flexible silicone resin Spray, dip or paint; clean with soap and water; does not need primer; non toxic Heat and moisture resistant, good adhesion, highly flexible, may be used on multiple surfaces even fabric and concrete Requires up to 48 hours to fully cure; heat and UV light can speed curing
Polysiloxane Option that combines silicone and polyurethane properties, without using isocyanates Applied directly to primed steel or previously painted substrates by brush, roller or spray; low VOCs Durable, glossy finish; highly resistant to UV, weather, and chemicals; retains color and gloss Surface must be well-prepared to ensure adhesion; low flexibility


Metal Coatings Process Substrates Advantages Disadvantages
Anodized Formation of protective oxide layer; immersion in electrolytic solution Non-ferrous metals, primarily aluminum Long-lasting, chemically stable,, non-toxic, no dangerous by-products Unsuitable for ferrous metals; limited options for colors
Galvanized Immersion of metal in molten zinc bath to produce protective zinc carbonate layer Steel, bolts and nuts, air ducts, trash cans Highly stable, adheres tightly; zinc coating actively covers scratches, cuts and dents after they occur Expensive for large items; color is dull gray
Electroplated (electrodeposition) Deposition of a thin layer of one metal on the surface of another; both metal are placed in electrolytic solution Copper, nickel, gold, silver, chrome, zinc tin, jewelry, ornaments; Excellent corrosion resistance; often increases in mechanical properties, can produce aesthetic appearance Expensive; produces non-uniform coating thicknesses; potentially toxic; solutions contain environmentally harmful chemicals
Powder Coating An electrostatic process to adhere powder-based substance onto a charged metal surface followed by heat curing. Metals, household appliances, automobile parts Coatings are durable with many color options; no solvents are used thus no VOCs emissions Requires spray booths and ovens, difficult to achieve thin coatings
Paint Coating Application of liquid paint; some types of polymers require mixing prior to application Almost anything Readily accessible; cost effective; wide variety of options Some paints contain toxic elements and/or VOCs.; durability is lower than other coatings

Synonyms and Related Terms

coat; surface coat; Anstrich (Deut.); enduit (Fr.); revêtement (Fr.); recubrimiento (Esp.); rivestimento (It.); revestimento (Port.)

Collection Risks

(from Tetreault 2017) "Coatings formed by oxidative polymerization, such as oil-based paints, oil-based urethanes, alkyds, melamine and epoxy esters (one-component or one-part systems), should be avoided in museums because they release acids and peroxides that can harm objects, especially papers, metal objects (lead, copper and their alloys) and black and white photographs. Fortunately, with new volatile organic compound (VOC) regulations in Canada and the United States, these coatings are becoming less and less available. The coatings that are generally acceptable in archival and museum contexts are acrylic or acrylic-urethane emulsion paints (latex) and, for special applications, two-part epoxy and two-part urethane paints."

Resources and Citations

  • Jean Tétreault, Products Used in Preventive Conservation CCI, December 2017. Link
  • Corrosionpedia: Coatinghttps://chansmachining.com/types-of-industrial-coating/ Accessed October 2024
  • Wikipedia: Coating Accessed Oct 2024
  • Chans Machining: Industrial coatings Accessed October 2024
  • Richard S. Lewis, Hawley's Condensed Chemical Dictionary, Van Nostrand Reinhold, New York, 10th ed., 1993
  • ASTM, "Standard Terminology Relating to Paint, Varnish, Lacquer and Related Products", Annual Book of ASTM Standards, Section 6, Paints, Related Coatings and Aromatics, ASTM, D16, 7-Jan, Jul-96
  • Random House, Webster's Encyclopedic Unabridged Dictionary of the English Language, Grammercy Book, New York, 1997
  • The American Heritage Dictionary or Encarta, via Microsoft Bookshelf 98, Microsoft Corp., 1998
  • Art and Architecture Thesaurus Online, http://www.getty.edu/research/tools/vocabulary/aat/, J. Paul Getty Trust, Los Angeles, 2000

Retrieved from "https://cameo.mfa.org/index.php?title=Coating&oldid=99667"