Difference between revisions of "Rods/Pipes"

From CAMEO
Jump to navigation Jump to search
(Created page with "==Description== A plastic rod is a solid plastic shape generally made by the process of plastic extrusion. Most plastic rods fall into the category of thermoplastic that c...")
 
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Description==   
 
==Description==   
−
A plastic rod is a solid plastic shape generally made by the process of plastic extrusion. Most plastic rods fall into the category of thermoplastic that can be reheated and harden when they cool. Thermoplastics have a wide range of properties and can be recycled. In contrast thermosets, can not be reshaped whenh heated and are not recyclable.  However, the structural integity of termosets and their resistance to chemicals often make them preferable over metals because they have a higher strength to weight ratio. Thermosets are often used in composites.
+
A rod is classically defined as a thin, straight cylindrical bar of material, usually wood or metal. In the 20th century, plastics became the the material of choice for most rods as they were readily available and light weight. New plastic materials offer strength and stiffness comparable to steel, and innovative processing capabilities allow us to machine plastic parts with tight tolerances. Combined with other benefits, many industries – particular medical and aerospace – are replacing their metal parts with plastic.  
−
The information presented in the table below is applicable to rods, pipes and rigid tubes.
 
  
 +
For art conservation, small and flexible tubes are mainly used as padding and interleaf over monofilament thread or metal rod mounts. Examples of tubing include heat-shrinkable tubing (made of [[Teflon]], [[polyethylene]] or [[polypropylene]]) on metal wire, or [[Silicone resin|silicone]] and polyethylene (surgical) tubing over monofilament lines to provide padding at points of contact. Polyethylene foam tubes and foam cylinders, sold typically as insulation to cover metal pipes, can also be used as padding and support in a variety of museum applications. Large and rigid tubes or rods are used primarily for display and for storing rolled flat textiles and similar objects. Tubing made of flexible [[Polyvinyl chloride|PVC]] ([[Tygon]]), [[vulcanized rubber]] or any rubber containing sulfur compounds should not be used.
 +
 +
A plastic rod is a solid plastic shape generally made by the process of plastic extrusion.  Most plastic rods fall into the category of thermoplastic that can be reheated and harden when they cool. Thermoplastics have a wide range of properties and can be recycled.  In contrast thermosets, can not be reshaped when heated and are not recyclable.  However, the structural integrity of thermosets and their resistance to chemicals often make them preferable over metals because they have a higher strength to weight ratio. Thermosets are often used in composites.  Due to the wide variety of plastics currently used in the production of plastic rods, the table below has been created to show some of their variations.
 +
 +
{| class="wikitable"
 +
|-
 +
! Materials
 +
! Tensile strength (psi)
 +
! Density (g/cm3)
 +
! Fabrication
 +
! Comments
 +
|-
 +
| colspan="5" | '''''Thermoplastic'''''
 +
|-
 +
| [[Acrylonitrile butadiene styrene|Acrylonitrile-Butadiene-Styrene]] (ABS)
 +
| 4,100
 +
| 1.04
 +
| Easy to machine, can be welded  (ultrasonic and thermal); easy to paint or glue
 +
| Low cost engineering plastic with  good impact resistance and strength. Used for tubes and rods
 +
|-
 +
| [[Acetal resin|Acetal]]  ([[Delrin]], polyoxymethylene)
 +
| 10,000
 +
| 1.42
 +
| Can be drilled, cut, sawed,  sanded, maintains close tolerances
 +
| High-strength, semi-crystalline  with low absorption in moisture; resistant to solvents
 +
|-
 +
| [[Acrylic resin|Acrylic]]  ([[Plexiglas]])
 +
| 10,000
 +
| 1.19
 +
| Cast rods have better optical  clarity and machinability than extruded rods, but also more costly
 +
| Strong, stiff, with glass-like  properties (clarity, transparency, and brilliance), but it is half the weight  and has much more impact resistance than glass
 +
|-
 +
| [[Nylon]]
 +
| 12,400
 +
| 1.14
 +
| Easy to fabricate, lightweight
 +
| Stiff and strong engineering  plastic containing outstanding wear and abrasion resistance; should be ne  used for extened outdoor service
 +
|-
 +
| [[Polyamide-imide|Polyamide  imide]] (PAI)
 +
| 21,000
 +
| 1.41
 +
| Easy to fabricate and weld using  thermoplastic welding equipment
 +
| Good wear and radiation  resistance, inherently low flammability and smoke emission, and high thermal  stability. The highest strength of any unreinforced thermoplastic,
 +
|-
 +
| [[Polycarbonate]]
 +
| 9,500
 +
| 1.20
 +
| Can be drilled, cut, sawed,  sanded, maintains close tolerances; easy to join with adhesives
 +
| Semi-transparent, stiff, and  strong with outstanding impact resistance and low moisture absorption.
 +
|-
 +
| [[Polyethylene]]  (HDPE)
 +
| 4,000
 +
| 0.96
 +
| Easy to fabricate and weld using  thermoplastic welding equipment
 +
| High-density polyethylene is a  chemically resistant, strong, durable, lightweight plastic material
 +
|-
 +
| [[Polyetheretherketone]]  (PEEK)
 +
| 14,000
 +
| 1.32
 +
| Readily machined maintaining  close tolerances
 +
| Very high mechanical strength  and dimensional stability (similar to Delrin, PTFE and Nylon)
 +
|-
 +
| [[Polyphenylene sulfide|Polyphenylene  sulfide]] (PPS)
 +
| 12,500
 +
| 1.35
 +
| Easy to fabricate and weld using  thermoplastic welding equipment
 +
| Good heat resistance, dimensional  stability, rigidity, chemical resistance, flame retardance, and moist-heat  resistance. It is also resistant to acids, alkalis, mildew, bleaches, aging,  sunlight, and abrasion
 +
|-
 +
| [[Polypropylene]]
 +
| 5,400
 +
| 0.91
 +
| Easy to fabricate and weld using  thermoplastic welding equipment
 +
| Chemically resistant plastic rod  with excellent aesthetic properties at a cost that is low. The polypropylene  plastic rod is easy to weld using thermoplastic welding equipment,
 +
|-
 +
| [[Polytetrafluoroethylene]]  (PTFE, [[Teflon]])
 +
| 1,500-3,000
 +
| 2.15
 +
| Easy to fabricate and weld using  thermoplastic welding equipment; adhesion is difficult
 +
| Soft, low friction fluoropolymer  rod that has outstanding resistance to weathering and chemicals
 +
|-
 +
| [[Polyurethane]]
 +
|
 +
|
 +
| Easy to fabricate and weld using  thermoplastic welding equipment
 +
| can be bonded to metals fabrics  and other plastics
 +
|-
 +
| [[Polyvinyl chloride]] (PVC, Vinyl, [[Tygon]])
 +
|
 +
| 1.42
 +
| Easy to fabricate and weld using  thermoplastic welding equipment
 +
| Strong and stiff; low-cost  plastic material that is easy to fabricate and easy to bond using solvents  and adhesives. The polyvinyl chloride plastic rod is also easy to weld using  thermoplastic welding
 +
|-
 +
| Ultem  (Polyetherimide, PEI)
 +
| 15,200
 +
| 1.27
 +
| Can be drilled, cut, sawed,  sanded, maintains close tolerances
 +
| Properties similar to PEEK, but  with a lower impact strength and usable temperature as well as a lower cost;  excellent flame resistance
 +
|-
 +
| colspan="5" | '''''Thermoset'''''
 +
|-
 +
| [[Fiberglass |Fiberglass]]  reinforced plastic (FRP)
 +
| 30,000
 +
| 1.07-1.20
 +
| Can be drilled, cut, sawed,  sanded, maintains close tolerances
 +
| Thermoset; rigid polyester  matrix reinforced with glass fibers; good insulator with low thermal  conductivity; not electrically conductive
 +
|-
 +
| Filled  [[Phenolic resin|phenolic]]
 +
| 11,500
 +
| 1.35
 +
| Machines readily with excellent  dimensional stability
 +
| Can  visually look appear like wood or metal;  may emit formaldehyde
 +
|-
 +
| Reinforced  [[Epoxy|epoxy]] (FR-4 Glass Epoxy)
 +
| 38,000
 +
| 1.8
 +
|
 +
|
 +
|-
 +
| colspan="5" | '''''Other'''''
 +
|-
 +
| [[Aluminum]]  6061-T6
 +
| 45,000
 +
| 2.70
 +
| Good machinability
 +
| Can cause galvanic corrosion;  easily deforms under impact
 +
|-
 +
| [[Copper]]
 +
| 28,000
 +
| 8.93
 +
| Good machinability
 +
| May oxidize and/or corrode
 +
|-
 +
| [[Brass]]
 +
| 45,000
 +
| 8.5-8.8
 +
| Good machinability
 +
| May oxidize and/or corrode
 +
|-
 +
| [[Stainless steel|Stainless  Steel]] 304
 +
| 90,000
 +
| 7.7-8.0
 +
| May require welding or cutting  torches
 +
| May oxidize and/or corrode; requires painting or galvanizing; can permanently deform under  impact
 +
|-
 +
| [[Glass]]
 +
| 1,000
 +
| 2.4-2.8
 +
| May splinter or shatter
 +
| Transparent, stable in most  environments
 +
|-
 +
| [[Wood]]
 +
| 12,000
 +
| 0.48
 +
| Easily fabricated, joined and  adhered
 +
| Can warp, rot and decay,  susceptible to attack by insects; low thermal conductivity; may emit acidic  vapors when drying
 +
|}
  
 
== Synonyms and Related Terms ==
 
== Synonyms and Related Terms ==
Line 8: Line 163:
  
 
==Resources and Citations==
 
==Resources and Citations==
 +
* Jean Tétreault, '[https://www.canada.ca/en/conservation-institute/services/conservation-preservation-publications/technical-bulletins/products-used-preventive-conservation.html Products Used in Preventive Conservation]', Canadian Conservation Institute, Technical Bulletin 32
 +
* Industrial Quick Search: [https://www.iqsdirectory.com/articles/plastic-extrusion/plastic-rods.html Plastic Rods]
 +
* EPlastics: [https://www.eplastics.com/ Plastic Properties]
 +
* Curbell Plastics: [https://www.curbellplastics.com/Research-Solutions/Plastic-Properties Plastic Properties]
 +
* Bedford Reinforced Materials: [https://bedfordreinforced.com/wp-content/uploads/2019/11/BRP19032-FRP-vs-Traditional-Materials_Bedford_LR.pdf FRP vs other materials]
 +
* The Free Dictionary: [https://www.thefreedictionary.com/rod Definition]
  
  
−
[[Category:Materials database]][[Category:MWG]][[Category: Tubing/Rods]][[Category:Comparisons]]
+
[[Category:Materials database]][[Category:MWG]][[Category: Tubing/Rod]][[Category:Comparisons]]

Latest revision as of 11:08, 2 May 2023

Description

A rod is classically defined as a thin, straight cylindrical bar of material, usually wood or metal. In the 20th century, plastics became the the material of choice for most rods as they were readily available and light weight. New plastic materials offer strength and stiffness comparable to steel, and innovative processing capabilities allow us to machine plastic parts with tight tolerances. Combined with other benefits, many industries – particular medical and aerospace – are replacing their metal parts with plastic.

For art conservation, small and flexible tubes are mainly used as padding and interleaf over monofilament thread or metal rod mounts. Examples of tubing include heat-shrinkable tubing (made of Teflon, Polyethylene or Polypropylene) on metal wire, or silicone and polyethylene (surgical) tubing over monofilament lines to provide padding at points of contact. Polyethylene foam tubes and foam cylinders, sold typically as insulation to cover metal pipes, can also be used as padding and support in a variety of museum applications. Large and rigid tubes or rods are used primarily for display and for storing rolled flat textiles and similar objects. Tubing made of flexible PVC (Tygon), Vulcanized rubber or any rubber containing sulfur compounds should not be used.

A plastic rod is a solid plastic shape generally made by the process of plastic extrusion. Most plastic rods fall into the category of thermoplastic that can be reheated and harden when they cool. Thermoplastics have a wide range of properties and can be recycled. In contrast thermosets, can not be reshaped when heated and are not recyclable. However, the structural integrity of thermosets and their resistance to chemicals often make them preferable over metals because they have a higher strength to weight ratio. Thermosets are often used in composites. Due to the wide variety of plastics currently used in the production of plastic rods, the table below has been created to show some of their variations.

Materials Tensile strength (psi) Density (g/cm3) Fabrication Comments
Thermoplastic
Acrylonitrile-Butadiene-Styrene (ABS) 4,100 1.04 Easy to machine, can be welded (ultrasonic and thermal); easy to paint or glue Low cost engineering plastic with good impact resistance and strength. Used for tubes and rods
Acetal (Delrin, polyoxymethylene) 10,000 1.42 Can be drilled, cut, sawed, sanded, maintains close tolerances High-strength, semi-crystalline with low absorption in moisture; resistant to solvents
Acrylic (Plexiglas) 10,000 1.19 Cast rods have better optical clarity and machinability than extruded rods, but also more costly Strong, stiff, with glass-like properties (clarity, transparency, and brilliance), but it is half the weight and has much more impact resistance than glass
Nylon 12,400 1.14 Easy to fabricate, lightweight Stiff and strong engineering plastic containing outstanding wear and abrasion resistance; should be ne used for extened outdoor service
Polyamide imide (PAI) 21,000 1.41 Easy to fabricate and weld using thermoplastic welding equipment Good wear and radiation resistance, inherently low flammability and smoke emission, and high thermal stability. The highest strength of any unreinforced thermoplastic,
Polycarbonate 9,500 1.20 Can be drilled, cut, sawed, sanded, maintains close tolerances; easy to join with adhesives Semi-transparent, stiff, and strong with outstanding impact resistance and low moisture absorption.
Polyethylene (HDPE) 4,000 0.96 Easy to fabricate and weld using thermoplastic welding equipment High-density polyethylene is a chemically resistant, strong, durable, lightweight plastic material
Polyetheretherketone (PEEK) 14,000 1.32 Readily machined maintaining close tolerances Very high mechanical strength and dimensional stability (similar to Delrin, PTFE and Nylon)
Polyphenylene sulfide (PPS) 12,500 1.35 Easy to fabricate and weld using thermoplastic welding equipment Good heat resistance, dimensional stability, rigidity, chemical resistance, flame retardance, and moist-heat resistance. It is also resistant to acids, alkalis, mildew, bleaches, aging, sunlight, and abrasion
Polypropylene 5,400 0.91 Easy to fabricate and weld using thermoplastic welding equipment Chemically resistant plastic rod with excellent aesthetic properties at a cost that is low. The polypropylene plastic rod is easy to weld using thermoplastic welding equipment,
Polytetrafluoroethylene (PTFE, Teflon) 1,500-3,000 2.15 Easy to fabricate and weld using thermoplastic welding equipment; adhesion is difficult Soft, low friction fluoropolymer rod that has outstanding resistance to weathering and chemicals
Polyurethane Easy to fabricate and weld using thermoplastic welding equipment can be bonded to metals fabrics and other plastics
Polyvinyl chloride (PVC, Vinyl, Tygon) 1.42 Easy to fabricate and weld using thermoplastic welding equipment Strong and stiff; low-cost plastic material that is easy to fabricate and easy to bond using solvents and adhesives. The polyvinyl chloride plastic rod is also easy to weld using thermoplastic welding
Ultem (Polyetherimide, PEI) 15,200 1.27 Can be drilled, cut, sawed, sanded, maintains close tolerances Properties similar to PEEK, but with a lower impact strength and usable temperature as well as a lower cost; excellent flame resistance
Thermoset
Fiberglass reinforced plastic (FRP) 30,000 1.07-1.20 Can be drilled, cut, sawed, sanded, maintains close tolerances Thermoset; rigid polyester matrix reinforced with glass fibers; good insulator with low thermal conductivity; not electrically conductive
Filled phenolic 11,500 1.35 Machines readily with excellent dimensional stability Can visually look appear like wood or metal; may emit formaldehyde
Reinforced Epoxy (FR-4 Glass Epoxy) 38,000 1.8
Other
Aluminum 6061-T6 45,000 2.70 Good machinability Can cause galvanic corrosion; easily deforms under impact
Copper 28,000 8.93 Good machinability May oxidize and/or corrode
Brass 45,000 8.5-8.8 Good machinability May oxidize and/or corrode
Stainless Steel 304 90,000 7.7-8.0 May require welding or cutting torches May oxidize and/or corrode; requires painting or galvanizing; can permanently deform under impact
Glass 1,000 2.4-2.8 May splinter or shatter Transparent, stable in most environments
Wood 12,000 0.48 Easily fabricated, joined and adhered Can warp, rot and decay, susceptible to attack by insects; low thermal conductivity; may emit acidic vapors when drying

Synonyms and Related Terms

dowel; stick; pole; wand; staff,

Resources and Citations

Retrieved from "https://cameo.mfa.org/index.php?title=Rods/Pipes&oldid=95726"